B

Class B Push-Pull Amplifier: Crossover Distortion Lab

Interactive demonstration: When Vo(peak) ≫ VBE, crossover distortion is minimal; as Vo decreases, distortion dominates.

Vo >> VBE : Minimal Crossover Distortion
Vm = 12.0 V | Vo(peak) = 11.3 V
0.2V (Cut-off) 1.5V (Severe) 5.0V (Moderate) 30.0V (Vo ≫ VBE)
0.70 V (Si)
0.3V (Ge) 0.7V (Si) 1.2V (Darlington)
Oscilloscope Y-Scale Normalized Shape

Locks visual wave height to compare dead-zone width as Vo shrinks.

Classroom Presets

Real-Time Oscilloscope: Waveforms & Crossover Dead-Zone

Showing 2 full cycles. Notice how the red dead-zone interval 2θ changes as you adjust Vo height.

Vin(t) Vo(t) Actual Ideal Sine Dead-Zone (±VBE)
Lab Insight At Vm = 12.0V, peak output Vo(peak) = 11.3V is 16.1× larger than VBE (0.7V). The transistor turn-on delay is only θ = 3.3°, making crossover distortion almost invisible!

Transfer Characteristic (Vo vs. Vin)

Flat deadband between -VBE and +VBE relative to signal swing

Slope = 1 (Active)

Complementary Push-Pull Stage Status

Instantaneous transistor states synced with wave cursor

Q1 (NPN) CONDUCTING
+VCC -VCC Vin Q1(NPN) Q2(PNP) Vo RL
Instant Vin: +0.00 V
Instant Vo: +0.00 V
Cycle Conduction Split 3.7% OFF
Q1 Active Deadzone Q2 Active
Peak Output (Vo,peak)
11.30 V
Vm - VBE
Ratio (Vo,peak / VBE)
16.1 ×
Vo ≫ VBE Satisfied
Firing Angle (θ)
3.35°
θ = arcsin(VBE / Vm)
Dead-Zone Time %
3.72%
(2θ / 180°) × 100%
Conduction Angle
173.3°
180° - 2θ (Ideal = 180°)
Crossover THD % LOW
1.4%